Turning Department:
2002 Miyano BND-51S W/ 2.5" thru the spindal bar feed/live tooling with sub-spindle
 
Hardinge Cobra 42 Turning Center, 1996 with automatic material loader.  1 5/8" through spindle capacity 6" chuck.
 
Omni-Turn GT175 turning center, 2001, with live milling and cross drilling 1 1/16" capacity

New Hyundai Kia SKT-250 12" Diameter Capactiy

Vertical Milling Department:
3ea 2008 YCM Model FV-102A 20" X 40" Vertical Machining Centers
 
YC1 2001, FV102A machining center 40"x20" travel with 10,000 RPM, 24 tools, ceramic bearing spindle, liquid cooled.

Fadal 1998 3016 machining center 30"x16" travel with 10,000 RPM spindle, 21 tools 4th axis equiped, liquid cooled.

Fadal 2000 3016 machining center 30"x16" travel with 7,500 RPM spindle, 21 tools, liquid cooled.

Horizontal Milling:
1ea 2008 Makino A51 Horizontal Machining 60 tools 14,000 RPM spindle. see www.makino.com for pictures
 
Kiwa 2005, KNH-426x expandable 2-9 pallet 120 tool rapid tool change (1.2 seconds) horizontal milling center, 15.75"x15.75" and 19.68"x19.68" pallet sizes.  Axis travel: X=23.62" (600mm), Y=24.02" (610mm), Z=26.18" (665mm), B (.001 increments) full rotary movement.  Rapid traverse = 2,362 inches per minute (60 meters).  35HP, 12,000 RPM automatic tool and pallet changer.

Swiss Screw Machine Department:
2008 Citizen A-20 Type IIV 5 Axis Swiss Type Turning Center 3/4" Diameter capacity with Auto Loader. see www.marucit.com go to products, then swiss turning centers for pics
 
2ea Star RNC-16 1993, Swiss automatic 5/8" diameter capacity, equipped with automatic bar feeder.

Star SA-16 2000, Swiss automatic 5/8" diameter capacity, equipped with ful back spindle and live tooling, LNS Hydrobar, 7 axis complete part of machine for faster production.

2008 Citizen A-20 Type IIV 5 Axis Swiss Type Turning Center 3/4" Diameter capacity with Auto Loader.

Fully Equipped Climate Controlled QA
Tesa Micro-Hite CMM
Starret Rapid Check 2 Coordinate Measuring Machine, fully automatic with Apogee Software.
Zygo Laser Mic plus full set of plug and thread gauges.
Atmosphere controlled dedicated QC department to provide consistent parts measurement checking.

Other Equipment:
Agathon Diamond Tool Grinder
K.O. Lee Tool Grinder
Hardinge DSM-59 Second Operation Lath
Ingersol Rand EP-7 Rotary Air Compressor
Other Multiple Support Equipment